Tuesday, 28 June 2011

Coastal Battery stage 2

I've started to fit the bits together for the coastal battery. The pictures show the construction of the gun turret and how the guns can be traversed from left to right, and also illustrates how the two cardboard tubes work inside each other. Two stones from the back garden are used on both side of the bunker and in filled with filler. More updates to follow.

Sunday, 12 June 2011

3mm fall of shot markers

A post on my experimentation in the smaller end of the scale world, I'm looking at creating some fall of shot markers for my intended forces in 3/2mm scale. In a £1.99 packet of pipe cleaners, you get about 75 per pack, I found them in a traditional old tobacconist shop in Birmingham, I have seen some in Hobby craft but they did not look to me like the old traditional pip cleaners I remember my Grandfather using. More like mini toilet brushes. the ones I found have the nice uneven texture, they do come in a number of colours, some off white other more pure white. The top picture has a selection of some of my reference picture grouped together, the bottom 2 show a test explosion, no base work or painting just the bare pipe cleaners, using about 4-5 to create this effect, will experiment further with painting and glue combinations. double click on the pictures for bigger versions.

Tuesday, 7 June 2011

Coastal gun battery

So here we have all the bits of the gun battery put together, nothing stuck together yet, so things may change a bit in the final version. The top two pictures show the bunker with the roof of, exposing the workings of the turret, the key thing is to find 2 cardboard tubes that slip into each other, quite close fitting is the best. This will allow the guns to traverse left to right once the roof is glued into position securing the outer tube and leaving the inner one with the guns glued in position free to rotate.